Banner

新闻详情

Home > news > Content

Characteristics of greenhouse motor

Edit:Weifang Liwang Electric Co., Ltd.UpDate:2019-03-22

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; The development of the greenhouse is developing in the direction of intelligence, and as the key to the driving force of the intelligent greenhouse——Greenhouse motorEspecially important, the quality of the greenhouse motor directly affects the normal operation of the greenhouse. The greenhouse motor is a relatively precise machine. The purpose of using it is to reduce the speed and increase the torque. Compared with other reducers, the characteristics of greenhouse motors:

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (1) Comes with stroke control, which can accurately control the reducer stroke.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (2) generally adopts worm gear drive with self-locking function.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (3) Long-term use in high temperature and high humidity or outdoor environments, the requirements for electrical parts are very strict.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (4) The frequency of use is low, the working hours are short, and they are in a long-term disabled state.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (5) The applicable environment span is large, and it can be used in high-temperature areas or very cold environments, and has a wide range of applications.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (6) Many installation locations are relatively high and are not easy to maintain.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; These characteristics require that manufacturers of greenhouse motors are strict in design, material selection and installation of greenhouse reducers. The greenhouse reducer is mainly composed of a reduction drive part, an electric drive and a limit. The general reduction gearbox is maintenance-free, and the motors are all IP 55 motors with better waterproof. However, due to the special use environment, some problems will inevitably occur during the use of the greenhouse reducer.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Weifang Liwang Electric Co., Ltd. summarized the common problems and solutions of greenhouse motors through on-site visits and work experience, to the majority of friends Reference:

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Some transmission problems

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 1) Manufacturers ’production design defects, manufacturing, material selection, and assembly failure

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; In order to reduce costs, some manufacturers have insufficient gear machining accuracy and are prone to damage. Therefore, choose a manufacturer with higher quality and stability.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 2) The greenhouse design is unreasonable

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Greenhouse reducer design has rated torque requirements, so please design the number of greenhouse reducer configuration within the rated torque, otherwise it may cause waste, Or it may cause the small horse-drawn cart to run under high load.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 3) Improper installation

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; If the installation worker has insufficient experience, the rack and pinion are not installed correctly, and the installation angle is wrong, the excessive resistance will lead to overload and damage the reducer. We recommend adding an overload protection device in the control box to prevent overload from damaging the greenhouse motor; reducer motor is installed in parallel with the ground; before installation, turn on the power to test whether the reducer is running normally. Hold the limit micro switch by hand to see if it is It works normally, and install after confirming that it is correct.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 4) Reducer oil leakage

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; It is recommended to replace the oil plug on the top of the reducer with a breather cap after installation.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 5) Poor lubrication

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; It is recommended to use gear oil for worm gears or 320 # gear oil, do not mix lubricants.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Causes of damage to the greenhouse motor

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 1) The motor burned out. Because the motor in the greenhouse is used in a high-temperature and high-humidity environment, the motor enters the water and burns the motor.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 2) Abnormal fever. Find a maintenance person to check and replace in time.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 3) External power supply problem. Low voltage, lack of equal.