Banner

新闻详情

Home > news > Content

What are the installation steps and precautions for the shed curtain motor?

Edit:Weifang Liwang Electric Co., Ltd.UpDate:2019-01-10

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Today Weifang Liwang Electric Co., Ltd. will talk about it for everyoneGreenhouse curtain motorInstallation steps:

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 1. Shed motors usually have {{5}} to 5 Root line, positive and negative can not be reversed, it will burn the machine if reversed.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 2. Brushless motors cannot run for a long time under load, otherwise it is easy to burn the machine.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 3. Brushless motors are electronic components and must not be struck violently.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 4. The speed of the brushless DC motor used in the greenhouse curtain motor can pass PWM To adjust the speed, do not use voltage to adjust the speed, usually the voltage of the brushless DC motor is constant.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Instructions for using the shed sliding screen motor:

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Use the shed curtain motor to abide by the provisions in the manual, and strictly follow the instructions in the manual.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 1. During the use of the shed curtain motor, the corresponding standards and regulations Working within the scope of the scope, must not be higher than the scope of action.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 2. When receiving the product, please check in time for any damage or parts in the transportation If there is a problem, please contact the transportation department.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 3. Work related to transportation, installation, commissioning, operation, maintenance and repair, It can only be carried out by qualified personnel in accordance with relevant regulations.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 4. When the shed curtain motor is scrapped, the box, gears, shafts and bearings Wait for treatment according to scrap. A part of the turbine is made of non-ferrous metals, which must be handled in accordance with environmental protection regulations, and the oil must be collected and processed correctly.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; The daily inspection work of the shed curtain motor:

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 1. After the shed curtain motor is stopped, it is necessary to check the oil level Turn off the power to avoid electric shock, then wait for the motor to cool, then remove the oil level plug and check whether the oil is full.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 2. Install the oil level plug.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 3. When changing the oil, it is difficult to drain the oil due to the increased viscosity of the oil after cooling So we should change the oil at the operating temperature.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 4. Place an oil receiving pan under the oil drain plug and open the oil level screw Plug, ventilator and drain plug.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 5. Clean the oil.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 6. After that, tighten the oil drain plug and add new oil of the same brand It should be noted that the amount of oil should remain the same as the installation position. After checking the oil level, tighten the oil level plug and breather.