Banner

行业知识

How to disassemble and maintain the greenhouse motor?

Edit:Weifang Liwang Electric Co., Ltd.UpDate:2019-01-11

0010010 nbsp; 0010010 nbsp; 0010010 nbsp;Greenhouse motorNow it has been widely used in many industries. Because of its relatively good service life and controllability, it has been widely praised in many control fields, so it has been liked and favored by customers, but the greenhouse motor in the later stage There are many precautions for disassembly, cleaning, maintenance and other work. Reasonable maintenance will have a greater benefit for the service life of the greenhouse motor. Today, Weifang Liwang Electric Co., Ltd. will share with you the installation and disassembly of the greenhouse motor What are the specific steps?

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; The greenhouse motor needs to be disassembled and inspected after being used for a period of time, so that it can be discovered in time The problem can also ensure the normal use of the greenhouse motor equipment, but some problems should be paid attention to when disassembling, so that there will be no errors, so how should we disassemble and install the greenhouse motor.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (1) First remove the external wiring of the greenhouse motor and mark it, Then loosen the foot screws to separate the greenhouse motor from the transmission machinery.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (2) For greenhouse motors equipped with rolling bearings, the outer bearing Cover, then loosen the fastening screws of the end cover, mark the joint between the end cover and the housing of the machine base, and screw the removed screws of the fastening end cover into the two sets of motor end covers on the greenhouse Push the end cap out of the screw hole.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (3) When disassembling the motor of the greenhouse with brushes, the brushes should be Take it out of the brush holder, and mark the position of the neutral wire of the brush for the DC motor.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (4) Dismantle the pulley or coupling on the shaft of the greenhouse motor, Sometimes it is necessary to add some kerosene in the gap between the motor shafts of the pulleys to lubricate them and facilitate disassembly.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; (5) When drawing out the rotor of the greenhouse motor, be careful not to hurt Stator coils can be drawn out by hand for some rotors that are not heavy. If the weight is relatively large, use a lifting device to hang out.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 0010010 nbsp; the above is the disassembly and maintenance method of greenhouse motor summarized by Weifang Liwang Electric Co., Ltd. Let the service life of the greenhouse motor not shorten, if you have other problems, please feel free to contact us.